Topcom WBR 754SG - Manual (Page 10)

10 Topcom Skyr@cer WBR 754
- PPPoE to obtain IP automatically: mostly used for connecting the WBR754 to an ADSL-Ethernet Bridge with
PPPoE dial up.
- enter username and password (twice)
- Click Next to proceed.
-
PPPoE with a fixed IP address: PPPoE connection with fixed WAN IP address.
- enter username, password (twice) and WAN IP address
- Click Next to proceed.
- PPTP: for setting up a VPN connection: in this case the WBR754 WAN port is connected at the LAN site of another
existing network !
- enter the VPN IP address, Subnet Mask and Gateway.
- enter the VPN Server IP address, PPTP Account and Password (twice).
- Click Next to proceed.
• Now you can setup the basic settings for the Wireless part.
- Select Enable to enable the Wireless LAN
- Choose an SSID and a Channel for your wireless network. Please make sure that the wireless
clients will operate on the same SSID and the same channel to make wireless data
communication possible.
- Click Next to proceed.