Toastmaster TCGF1200P - Manual (Page 2)

INTENDED FOR COMMERCIAL USE ONLY. NOT FOR HOUSEHOLD USE.
Toastmaster, in line with its policy to continually improve its product,
reserves the right to change materials or specifications without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements,
additions, or replacements for previously purchased equipment.
18 lb. Gas Fryer
TMFG18
Toastmaster ® 10 Sunnen Dr, St. Louis MO 63143 • www.toastmastercorp.com
Toll Free: 1-800-264-7827 • Telephone: 1-314-781-2777 • Fax: 1-314-781-3636
Typical Specifications:
Gas fryer is constructed with an all stainless steel cabinet with 4” high die-cast legs with a 1-3/8” adjustment. Fryer has an 18 lb.
(8.16 kg) fat capacity welded steel kettle, tube type, with two welded heat tubes. Tubes have stainless steel radiants heated by
two in-shot burners. Kettle has large foam area and large cold zone, and has a 1/4 turn front drain valve. Fryer has a gas thermo-
stat, manual reset type hi-limit thermostat and automatic safety pilot. Two large capacity nickel plated rear hanging baskets are
supplied as standard equipment. Gas connection is 3/8” (1 cm) N.P.T. male. Available in natural or propane gas. Unit is AGA
Certified, CGA and NSF listed. Printed in the U.S.A.
Model Number TMFG18
Overall Dimensions 12” W x
24-5/8” H x
24” L
Fat Container 10-3/4” W x
10” H x
13” L
Foam Compartment 10-3/4” W x
1-1/4” H x
20” L
Cooking Surface Height (In.)
17-5/8
(cm)
(44.8)
Installed Weight (lbs.) 64 lbs.
(kg) (29.0)
Shipping Weight (lbs.) 73 lbs.
(kg) (33.1)
Pre-Heat time to 350
o
F (177
o
C) 12 minutes
Fat Capacity 18 lbs. (8.2 kg)
Pounds of French fries per hr. 18 lbs.
BTU’S per hr. to maintain 350
o
F 4,825
TMFG18 24,000/HR 24,000/HR 3/8” (1cm) N.P.T.
Natural Propane
Model No. BTU Rating Type Conncetion
TM111/1060