beautypg.com

Getting started, Switching on – Technicolor - Thomson 20LCDB03B User Manual

Page 8

background image

8

3. GETTING STARTED

Switching on

Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following
pages describing how to use the remote control and the channel set-up procedure.

1.

Connect the female plug to the AC socket on AC

adaptor.

2.

Connect the AC adaptor to the DC power input of

the set.

3.

Connect the male plug to the wall outlet as

illustrated.

Equipment for the UK is supplied with a mains cable fitted with a
moulded plug.
This plug contains safety components and must not be replaced by
one sold by general retailers. It is fitted with a fuse that protects your
television
.
If your set has stopped working, the fuse may have blown. If it has,
replace it with an identical ASTA or BSI certified (BS1362) 5-amp fuse
.

4. Connect the outside aeri

al

or cable network to the

socket at the back of the TV set.

The aerial socket (75 Ohms - VHF / UHF / cable) can be used for
connecting an external aerial or other equipment fitted with a
modulator (video recorder, satellite receiver, etc.).
We recommend that you do not connect other equipment (video
recorder, satellite receiver, etc.) to your TV set to begin with, so as not
to complicate the set-up procedure with the additional steps involved.
Connect them when you have finished setting up the channels by
referring to page 20 of this manual
.

5. Switch the TV on by pressing the on/off button on the right
side.

You will find a description of how to use the remote control on page 9.
Then go to page 11 for information on the initial set-up, or to page13
for information on manual set-up (if the channels have already been
set up on your TV).