Tannoy Nearfield Monitors Reveal - Manual (Page 14)

5.0 TECHNICAL SPECIFICATIONS
Loudspeaker
Frequency response (1) 65 Hz - 20 kHz
Recommended amplifier power 50 to 100 W rms into 8
Ω
Power handling Average (2) Programme
50 W rms 100 W rms
Nominal Impedance 6
Ω
Sensitivity (3) 90 dB SPL / 1 W @ 1 m
Distortion < 0.8%
Crossover frequency 3000 Hz
Cabinet
Drive unit Tannoy shielded 6.5” bass driver (1690)
Tannoy shielded 1” soft dome tweeter (1205)
Low frequency design Optimised bass-reflex load, in 12 litres
Cabinet construction 40mm MDF front baffle,
16 mm high density particle board.
Cabinet finish Red satin finish front
Grey suedette vinyl sides and back
Cabinet dimensions (HxWxD) 340 mm x 210 mm x 260 mm
Cabinet weight 7 kg
Shipping dimensions (HxWxD) 622 mm x 287mm x 440mm
Shipping weight 16 kg
NOTES : (1) +/- 3 dB , measured at 1m in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS426A.
(3) Averaged over specified bandwidth for half-space environment. For anechoic conditions the figure is to be decreased
by 3 dB.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.