Hyundai H-LCD800 - Manual (Page 8)

8
Notes:
1. When starting the Auto searching after setting, the color system and sound system for
all channels are stored into memory.
2.Unused channels are automatically skipped.
Preset function adjustment (manual search)
1. Press the MENU twice, the channel menu screen appears.
2. Press the CH (+)/(-) to select the current channel item.
3. Press the VOL (+)/(-) to locate the channel you want to preset to the position.
4. Press the CH (+)/(-) to select the manual search item.
5. Press the VOL (+)/(-), search is initiated and when a TV signal is received.during the
search, the search stops.
6. Repeat step 2.3.4.5 above to preset the channel position for other broadcasts etc.
c) Channel Setting
1. Press the MENU twice to display the channel screen.
2. Press the CH (+)/(-) to select the desired function mode.
3. Each time you press the VOL (+)/(-), the setting for individual item is change as
follows:
d) Color System
The mode changes in the folowing order
e) Sound System
The mode changes in the following order
f) Channes Skip
The mode changes in the following order
g) Fine tune
The frequency changes to allow fine tuning.