Tripp Lite B130-101A-WP - Manual (Page 5)

5
1 Connect the Male end of the VGA with audio splitter cable to the HD15
and 3.5 mm ports on the source computer.
2 Connect one of the Female ends of the VGA with audio splitter cable to the
Local Unit’s HD15 and 3.5 mm ports using a VGA cable and audio cable.
3 (Optional) Connect a local monitor and speakers to the remaining
Female connectors of the VGA with audio splitter cable using a VGA
cable and audio cable.
4 Connect the external power supply to the power jack on the local unit
and plug it into an appropriate power source.
5 Connect the 110 Punchdown Connector on the local unit to the 110
Punchdown Connector on the remote unit using Cat5/5e/6 cable.
6 Connect the HD15 and 3.5 mm ports on the remote unit to a monitor
and speakers using a VGA cable and audio cable.
7 Connect the external power supply to the power jack on the remote unit
and plug it into an appropriate power source.
8 Turn the display(s) on first.
9 Turn on the computer.
10 If the video on your monitor is either too dark or too light, use the Gain
Adjustment on the remote unit.
11 If the video on your monitor is fuzzy, or shows a ghosting effect, use the
EQ Adjustment on the remote unit.
Installation
1
2
3
4
5
6
7
200908079 93-2929.indb 5 9/22/2009 12:25:48 PM