Topcom BUTLER 3570 User Manual
Page 9
Topcom Butler 3570/Twin/Triple/Quattro
ENGLISH
Topcom Butler 3570/Twin/Triple/Quattro
9
3.3.2 Pre-dialling
With the pre-dialling feature you can enter and modify a number before making the call.
•
Dial a number of up to 25 digits. Press the navigator key
upwards and hold to insert a
pause. The screen displays a "P".
•
Select "Clear" with the right menu key
to correct. Press
to initiate the call. The
screen displays: "Calling 123456789". To hang up at the end of the call, press
or put
the handset back on the base.
3.4 RECEIVING A CALL
When you receive an external call, the screen displays: "External Call".
To take the call:
•
Press
(if the handset is not on its base/charger)
or
Lift the handset off its base (if the Auto Talk option is active) (see §“7.5 Auto Answer” ).
•
The call in progress
icon appears on the screen. The call duration is displayed after
about 15 seconds.
3.4.1 Adjusting the ring volume during incoming call
You can adjust the ring volume with the navigator key
or
while the telephone is ringing.
The ring volume is displayed on the screen. There are 5 volume levels as well as the option
of turning the ringer off altogether, in which case "Volume Off" is displayed and
icon
appears. This information remains on screen for about 3 seconds, or until the
key is
pressed.
3.5 HANDSFREE MODE
Handsfree lets you talk to your caller without holding the handset. It also enables other
people in the room listen to both sides of your conversation.
Make a handsfree call
•
Press
twice. The display shows . Dial the number. Your call can be heard over the
handset’s loudspeaker.
•
To switch back to the handset at any time, press
again. Press
to end the call. You
can switch any call to handsfree by pressing
during the call.
3.6 ADJUST EARPIECE/HANDSFREE VOLUME
During a normal or handsfree call, press
or
to select volume 1-5.
3.7 REDIAL A NUMBER FROM THE LIST
You can redial up to 20 of the last numbers called. If you have stored a name in the
phonebook to go with the number, the name will be displayed instead (see § “4 Phonebook” ).
Redial a number from the list:
•
Press
/P to enter the redial list. Scroll with
or
until the number you want is
displayed.
•
Press
to dial the number.