Transcend Information TS-PF700B-J - Manual (Page 29)

28
Detected Photo
Type (EXIF)
Horizontal Vertical
Fullscreen
Mode
Photo Frame
Orientation
Disabled Enabled Disabled Enabled
Landscape (A)
Portrait (B)
Alarm
The alarm function lets you use your Photo Frame like an alarm clock to wake you up in the morning.
1. Select Alarm from the Settings menu, and use the / or / buttons to highlight alarm
on/off, alarm time, alarm sound, alarm volume, alarm mode or sleep timer.
2. Press to modify the selected item.
•
Alarm On/Off: Enable (on) or disable (off) the alarm.
•
Alarm Time: Press or to switch between hour and minute, and or to adjust
the value. NOTE: “24H” or “AM/PM” can be changed in “Settings > Date/Time > 12H/24H”.
•
Alarm Sound: Press / or / to select from a choice of five default alarm sounds.
•
Alarm Volume: Press or to adjust the alarm volume.
•
Alarm Mode: This function allows you to adjust how often you want the alarm to go off. You
can select from 4 reoccurring alarm modes: Daily (Default), Weekdays, Weekends, and Once.
•
Sleep Timer: Press / or / to enable a sleep timer to shutdown the Photo Frame
after a specified amount of time. Available options are: 15 / 30 / 45 / 60 / 90 / 120 minutes and
Disable. You can also enable the sleep timer by pressing on the remote. When the
specified time is about to expire, a “Press [SLEEP] button on remote to disable” message
will appear. NOTE: To set Photo Frame to turn on or off automatically on a daily basis, please