Technicolor - Thomson LAD870 - Manual (Page 9)

Prog/Display SmartResume
(for RCA only)
When you stop CD play or power off the
unit (without disconnecting power sup-
ply), SmartResume is automatically activat-
ed. It stores all the current settings and
modes: current track, Shuffle, time display,
Mode (Repeat/Repeat All/Program), and
ESPX. When play mode is on again, the
unit RESUMES to the settings (unchanged)
and plays from where it left off at.
If CD compartment lid is opened, then
SmartResume stores only the following
modes: Shuffle Mode (Repeat/Repeat All),
and ESPX. Other settings such as track
play, time display, program setting and
memory are all reset or cancelled.
Repeating
You can replay the entire CD or one
track as many times as you wish as well
as listen to the beginning of each track for
10 seconds.
Press MODE successively to
1. Replay the entire CD .
2. Replay the current track
3. Replay the beginning of each track
for 10 seconds
(The number of the track being played will
be displayed and SCAN will appear.)
4. Press again to de-select function.
Program
This function lets you listen to the tracks
you selected in the order you want. The
CD player must be in Stop mode.
1. Press PROG. P will appear in the display.
2. Select the track to store by pressing
& press PROG again to
confirm.
3. Return to step 2 to store other tracks.
4. Press play button to listen to your
programming.
Note : To prevent excessive battery con-
sumption, the unit switches off automati-
cally after 10s if no key has been activated.
When programming, the unit can switch
off if you do not press any key within 10s.
If the unit swithes off, the programme will
be stored in memory. Resume program-
ming as normal by turning the unit on
again.
You can program up to 24 tracks.
To play your program again, press play.
To add/edit tracks to the program, go to
stop mode ; press and hold PROG button
again. Refer to step 2 of the above para-
graph.
6
THE CD PLAYER
EN
or
2370 - Euro - Rve02 8/13/99 4:34 PM Page 9