TANDBERG 150 - Manual (Page 30)

TANDBERG 150 User Manual
28
3.3 Security
Security contains the settings:

Encryption

Encryption Mode

IP Access Password

Access Code
3.3.1 Encryption
(Country specific)
Auto The system will try to set up calls using encryption.
If the far end system supports encryption (AES or DES), the call will be
encrypted. If not, the call will proceed without encryption. If the far end supports
encryption, the systems will initiate encryption after the call is connected (an
‘
open padlock
’
symbol will be displayed). When encryption has been established,
a
‘
closed padlock
’
symbol will be displayed.
Off The system will not send or receive encrypted data.
Technical encryption information like encryption algorithm and encryption check code can be
found in the Call Status menu.