TOA Electronics I6 AW - Manual (Page 9)

11. Technical Specifications
Frequency response (1) +/- 3dB 70Hz - 20kHz
Recommended Amplifier Power up to 180 watt / 8 ohm
Power Handling Average(2) Programme Peak (10ms)
90 watt
180 watt 360 watt
Sensitivity (1)
2.83 volt @ 1m
90dB 93dB (half space)
Maximum SPL (3) Average Peak Average (half space) Peak (half space)
@ 1m 109dB 115dB 112dB 118dB
Maximum SPL (3) With THP30 Transformer Average Peak Average (half space) Peak (half space)
@ 1m 104 dB 110dB 107dB 113dB
Transformer (i6T AW) Max. Insertion loss 1.1 dB 35Hz – 21kHz +/- 2dB
Primary Taps 30,15, 7,1.5 watt
Voltage Taps 70.7V & 100V
Impedance Nominal 8 ohm
Minimum 6 ohm
DI Averaged (PCQ) 7.41, 250 Hz - 16 kHz
@ 1kHz (ISO) 6.1
@ 2kHz (ISO) 6.3
@ 4kHz (ISO) 9.7
@ 8kHz (ISO) 9.6
@ 16kHz (ISO) 13.6
Q Averaged (PCQ) 7.74, 250 Hz - 16 kHz
@ 1kHz (ISO) 4.1
@ 2kHz (ISO) 4.3
@ 4kHz (ISO) 9.3
@ 8kHz (ISO) 9.1
@ 16kHz (ISO) 22.9
Driver Complement 1 x 6.5” (165mm) Constant Directivity Dual Concentric
Crossover Point 1.6 kHz
Enclosure 11 litre, vented polyethylene
Finish Charcoal or White
Protective Grille Perforated Aluminium
Connectors 2 x 4mm binding posts
Fittings 2 x M8 inserts for Yolk Bracket
4 x M6 inserts on rear of cabinet
Dimensions 344mm (H) x 250mm (W) x 225mm (D)
13.54” (H) x 9.84” (W) x 8.86” (D)
Weight 5.5 Kg (12.1 lbs)
Shipping Dimensions 400mm (H) x 500mm (W) x 300mm (D)
15.75” (H) x 19.69” (W) x 11.8” (D)
Shipping Weight 13Kg (28.6 lbs.)
NOTES: (1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal
or exceed the published specifications which Tannoy reserve the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.