Pc setup menu, 24 pc operation – Technika 40-260 User Manual

Page 24

Helpline No UK. 0871 2000 463 ROI. 01443 3940
Web Support: www.skymediauk.co.uk

PC Operation

PC SETUP MENU

Note: When the VGA/PC source mode is selected the Display menu will switch to the PC setup menu and
display a different set of options.

Auto Adjust

- Lets you automatically conﬁ gure the television to be used as a computer monitor

Horizontal Position

- Changes the horizontal position of the picture

Vertical Position

- Changes the vertical position of the picture

Phase

- To adjust delay time of phase in order to reduce the noise of picture

Clock

- Alter this in order to reduce the noise within the picture

Auto adjust

- Automatically adjust the display to it’s optimum settings

Auto phase

- Automatically adjust the phase to it’s optimum settings

Reset

- Restores the pc setup menu to it’s factory settings

Tip: If the computer is left in-active for a period of time, the television will switch into a ‘sleep’ state
(the screen will power off to save power). To switch back on press the standby button.

To access this menu, press [MENU] button on the remote control.

Use the

to navigate and press [OK] to select your chosen menu.

Once your chosen menu has been selected use the

to navigate through the different menu items.

To exit this menu at anytime, press [EXIT] button.

V. Position
H. Position
Phase
Clock
Auto Adjust
Auto Phase
Reset

Technika 40 LED.indd Sec1:24

25/02/2010 17:37:57