6 aging time – TP-Link TL-SL2218WEB User Manual
Page 56
49
Web Smart Gigabit Switch Family User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
MAC Address: Indicates MAC addresses already bound to the switch
ports.
Port: Indicates the switch port number corresponding to the bound MAC
address.
Further Explanation
1) The bound MAC address table contains all the MAC addresses bound
by the switch ports. Every entry contains one MAC address and its
corresponding port number.
2) The bound MAC address table is divided into several pages. At most 10
entries can be held in one page. The buttons “First”, “Previous” and “Next”
can be used to browse the whole table.
5.3.3.6 Aging Time
This page is showed as below:
Figure 5-33 Aging Time
Aging Time (0~3825): When a new MAC address is learned by the
switch, it will be added to the dynamic MAC address table and a relative
timer will be generated immediately. If no packet taking the MAC address
as its source passes through the switch in a specified length of time, that
MAC address will be removed from the MAC address table. This process
is called "aging", and the specified time length referred above is called