Connections and initial set up, Connecting: dvd player + tv set – Technicolor - Thomson DTH223 User Manual
Page 3
Connections and initial set up
3
EN
EN
Connecting: DVD player + TV set
Recommended Audio – Video connection
Connect a Scart-Peritel cable (not supplied) to the TV AUDIO VIDEO OUT (RGB) output
socket at the rear of your DVD player and to the AV1 input socket of your television set
(sometimes called AUX 1 or EXT 1).
Other Audio - Video connections
If there is no Scart-Peritel connector available on the television set, check whether there is
another Composite video to connect your player to by using the corresponding connector (see
page 4). In this case do not forget to also connect the Audio out socket (AUDIO OUT) to the
Audio in socket (AUDIO IN) on your TV set.
Note: for more information about signals, cables and Audio/Video sockets refer to page 4. For UK, please see
safety information regarding the mains plug at the end of this user manual, in the cover page.
Continue on page 5
The rear panel of your television set and your video player may be different from the ones illustrated here.
Television set
DTH 223
220 - 240 V
50 - 60 Hz
DTH 223 U
DTH 223 E
2_DTH223_en 23/03/04 18:15 Page 3