Topcom BUTLER 2600 - Manual (Page 31)

3. INSTALLATION
• Plug one end of the phone cable into the phone unit and the other end into the telephone line wall socket.
• Connect the small plug of the AC adaptor to the phone and the other end of the adapter cable to the electric socket.
• Insert 2 rechargeable batteries (AAA) inside the battery compartment of the handset.
Put the handset on the base unit. The red Charge LED will burn.
Charge the handset for a period of 24 hours before using the handset for the first time. To extend the battery life time,
decharge the batteries completely from time to time. As soon as the handset emits a warning
tone or when the battery icon
is empty, you have to put it back on the base unit.
4. BATTERY EMPTY INDICATION
When the battery is empty, the handset no longer carries out operations. When a battery is completely empty and you have
put the handset on the base unit for a short period of time, the Battery symbol will appear to be fully charged but this is
actually not the case. The battery capacity will decrease rapidly. We advise you to put the handset on the base unit for the
entire night so that it can be recharged thoroughly.
• Full battery [ ]
• Empty battery [ ]
When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning
signal. Place the handset on the base unit to charge.
5. OPERATION TELEPHONE
5.1 Outgoing calls
5.1.1 Making a phone call
• Press the Line button
. You will hear the dial tone.
• Enter the desired telephone number.
• Press the Line button
when you want to terminate the call.
Butler 2600/DUO
ENGLISH
31
bottom view of base
Telephone cord Power cable
B2600_DUO_scan.QXD 16-09-2004 09:54 Page 31