beautypg.com

Getting started - initial set up – Technika ADVANCED LCD19W-219 User Manual

Page 11

background image

GETTING STARTED - INITIAL SET UP

9

TUNING IN

IMPORTANT — Please ensure the TV has reached room temperature before connecting the power for

the first time
1) Connect the mains lead to rear of the TV and the plug to the wall. Switch on the TV at the power

switch on the side.

2) Connect the RF Cable supplied to the 'RF - In' on the rear of the TV and connect the other end of

the cable to your TV Aerial outlet

3) Install batteries in the remote control and press the red [POWER] button to turn on the TV.

The ‘First Time Installation’ menu should now appear. If it does not, please press [MENU] 8888 the menu will

appear.

4) Press [OK] on the remote control whilst ‘OK’ is highlighted on screen.

Tuning will now take place.

5) After tuning has taken place you will be taken to the program edit screen where you can move the

location of channels. Alternatively if it does not find any channels the below screen will appear and you

should investigate as to why your TV is not receiving a signal.

IMPORTANT - WE RECOMMEND YOU CONNECT TV'S WITH BUILT IN DIGITAL/FREEVIEW TO

SUITABLE AERIALS. I.E LOFT AERIAL OR OUTDOOR ROOF AERIAL. ALSO, PLEASE CHECK YOU

LIVE IN AN AREA THAT CAN RECIEVE DIGITAL/FREEVIEW STATIONS. WE DO NOT RECOMMEND

USING WITH INDOOR AERIALS UNLESS YOU ARE IN 100% COVERAGE AREA AND ALSO THAT

THE INDOOR AERIAL ISAMPLIFIED/HAS BUILT IN BOOSTER AND IS CAPABLE OF RECIEVING

DIGITAL/FREEVIEW. WE RECIEVE MANY CALLS TO OUR HELPLINE FROM CUSTOMERS ADVISING

THEY CANNOT RECIEVE DIGITAL/FREEVIEW CHANNELS. OFTEN, SIMPLY CONNECTING A

'BOOSTER' BOX IN BETWEEN THE TV AND THE AERIAL SOCKET SOLVES 95% OF CASES.

BOOSTERS/AMPLIFIERS ARE AVAILABLE FOR AROUND £10-£15 FROM MOST RETAILERS

IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE

CHANNEL INFORMATION CAN BE STORED.

First Time Installation

Country

Language

Please ensure that the aerial is connected to the connector

labelled ‘ RF In ’ on the rear of the TV .Ensure that OK is

highlighted in yellow and press ‘OK’ on your remote .If after
this scan ,not all digital channels are found ,your aerial may

require a signal booster .alternatively ,upgrade your aerial

to a high gain digital version .

OK

Cancel

UK

English

HDMI In

RF In

First Time Installation

Unfortunately the TV did not find any channels.
Please check your aerial connection
and refer to the user manual.
Do you wish to re tune your TV.

Yes

Do it next time

No

teac english manual 09.pdf 24/03/2009 15:19:18