beautypg.com

Technika DAB-124 User Manual

Page 9

background image

7

LISTENING TO FM RADIO

SOUND SOURCES
You can choose to listen to the following sources -

DAB radio

FM radio

iPhone/iPod (when docked)

Aux source (when connected via the rear panel Aux In

jack).

Selecting a source:

Press the

MODE button repeatedly to scroll through the

available sources.

Your radio can also receive FM band radio stations.
To change to the FM band:

Press the

MODE button repeatedly to select FM mode.

To auto-tune to FM stations:

Press the

SCAN button to search for the next station in

the band.

The radio will search and the tuning frequency will be displayed
whilst searching.
When a usable station is detected the radio will stop tuning and
play the station. If RDS data is present, the station name and
scrolling radio text will be displayed. If RDS data is not present,
the tuned frequency will be displayed.
To change the scan direction:

Press the

P

or

O

button to set the scan direction you

want before pressing the scan button.

To manually tune to FM stations:

Press the

P

or

O

button to tune the band in 50kHz

steps.

SELECTING A SOURCE

You can set your radio to switch automatically between
stereo and mono FM reception (Stereo allowed) or to receive
in mono only (Forced mono). Setting to Forced mono mode
may improve sound quality in areas where a weak aerial
signal results in a high level of background noise.
Changing the FM audio mode:

Whilst playing an FM radio station, press the

MENU

button.

‘Audio setting’ will be displayed.

Press the

OK button.

Press the

P

or

O

button to switch between the options

of ‘Stereo allowed’ or ‘Forced mono’.
Press the

OK button to confirm the selection.

Press the

MENU button to exit the menu.

STEREO/MONO RECEPTION

DISPLAY DIMMER

The display brightness can be switched between high,
medium and low settings by pressing the DIMMER button
repeatedly.
You can also set the display to dim automatically within a set
time period of a button being pressed. To set up automatic
dimming, refer to the ‘Backlight’ option in the settings menu
(see page 13).