Technika A700 User Manual
Page 17
Auto Run
This setting selects the display which comes on when the DPF is
switched on or brought out of Standby, Photo is the default. .
Press or to select Auto Run. Press
Press or to select the item. Press OK to confirm and return.
Power On and Power Off.
These parameters are set in the same manner. If you wish the frame to
switch on or off at a certain time you can set this up. The On/Off times
can be set to operate independently or together.
Press or to select Power on/Power off. Press
Press the keys to cycle Hour, Min and Frequency.
Press or to change the values.
You can set the On/Off time to operate once only, or daily.
The default is OFF.
If you set a Power ON time the frame wiill “Wake up” at the appointed
time and then display the “Auto Run” option which you have selected.
Press OK to confirm and return.
Default
This setting returns the DPF to factory settings.
Press or to select Default. Press
Press or to toggle YES/NO. Press OK to conifrm
If you select NO: you will be returned to the General Setup Screen.
If you select YES: the screen will momentarily blank. The DPF will
then switch on and the language sel;ection screen will appear. Refer
to Page 8.
Page 17
Language
Photo
Brightness
MainMenu
Contrast
Clock
Saturation
Calendar
Auto run
Power on
General Setup
Contrast
Photo
Saturation
MainMenu
Auto run
Clock
Power on
Calendar
Power off
Default
General Setup
(hh:mm)
Off
09
58
Contrast
YES
NO
Saturation
Auto run
Power on
Power off
Default
General Setup