Top Innovations HANDYMENDER SP-400 - Manual (Page 3)

5
IMPORTANT SAFEGUARDS
¾ When Threading or changing a needle, always unplug the power
supply
¾ Work carefully and watch the sewing area to avoid the needle
during operation
¾ Do not pull the fabric while mending as the needle may bend and
break or cause other damage
¾ Insure that the machine is threaded carefully before mending
¾ Never press or pull on the needle arm directly - always use the
hand wheel to move the needle
6
GETTING READY TO MEND
Hold the HandyMender with right hand and operate power switch
with thumb.
How to Sew
1. First, raise the Needle Arm to the highest position by turning the
Hand Wheel. Note: Hand Wheel may be turned in either
direction.
2. Lift the Presser Foot making sure not to push down on the
Needle Arm. Place fabric under Presser Foot.