Sony KDL-52X2000 - Manual (Page 43)

43 GB
Usi
ng Op
ti
onal
Eq
uip
m
e
n
t
Connecting to the TV (rear)
6
5
L
R
IN
IN
L
R
PC
OPTICAL OUT
DVD player
Decoder
DVD recorder
VCR
Video game
equipment
DVD player
Digital receiver
Decoder
PC
Hi-Fi audio
equipment
DVD player with
component output
VCR
Digital audio
(PCM) component
DVD player
To connect Do this
Digital receiver or
DVD player E Connect to the HDMI IN 5 or 6
socket if the equipment has a
HDMI socket. The digital video
and audio signals are input from
the equipment. If the equipment
has a DVI socket, connect the DVI
socket to the HDMI IN 6 socket
through a DVI - HDMI adaptor
interface (not supplied), and
connect the equipment’s audio out
sockets to the audio in the HDMI
IN 6 sockets.
Notes
• The HDMI sockets only support
the following video inputs: 480i,
480p, 576i, 576p, 720p, 1080i and
1080p. To connect a PC, use the
PC
socket.
• Be sure to use only an HDMI
cable that bears the HDMI logo.
PC F Connect to the PC sockets. It
is recommended to use a PC cable
with ferrites.
Digital audio
(PCM) component
G Connect to the OPTICAL OUT
socket using the Optical audio
cable.
Note
The OPTICAL OUT socket only
supports digital terrestrial signals.
Hi-Fi audio
equipment H Connect to the audio output
sockets
to listen to the sound
from the TV on Hi-Fi audio
equipment.
DVD player with
component output
I Connect to the component sockets
and the audio sockets
/ 4.
Video game
equipment, DVD
player or decoder
J Connect to the scart socket /
1. When you connect the
decoder, the scrambled signal from
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
DVD recorder or
VCR that supports
SmartLink K Connect to the scart socket /
2. SmartLink is a direct link
between the TV and a VCR/DVD
recorder.
VCR or DVD
player L For details, see page 5.