Perreaux CD Player - Manual (Page 10)

10
4 4 4 4
Rear Panel Functions
Caution! Please make all changes at minimum volume setting. Only increase the
volume after the connections have been made.
Digital Output
Using a standard 75Ω coax digital cable with RCA termination, connect the
digital output to the coax digital input on the external D/A converter.
These high quality gold plated sockets are highly conductive, corrosion resistant,
and provide less potential for corrosion induced distortion.
Refer to Chapter 13 “Specifications” for more details.
Unbalanced Analog Output
Standard single-ended outputs (RCA) supplying analog signals to the source
inputs of an audio preamplifier, integrated amplifier or receiver.
Using quality audio interconnect cables, connect the left channel output of the
CD1 to the left channel input on the preamplifier or other component and the
right channel output to the right channel input on the preamplifier or other
component.
Refer to Chapter 13 “Specifications” for more details.
Balanced Analog Output
Balanced outputs (XLR) providing analog signals to drive a preamplifier,
integrated amplifier or receiver equipped with a balanced input. Connection
should be made with high quality cables fitted with XLR connectors.
Connect the left channel output of the CD1 to the left channel input on the
preamplifier or other component and the right channel output to the right
channel input on the preamplifier or other component.