Using your housemate, Connecting the accessories – Top Innovations SF-850 User Manual
Page 4
Using Your HouseMate
WARNING: Before filling boiler with
water, be sure power is off and unit
has completely cooled down
.
x
Fill the bottle (K) with Distillated
or Tap Water.
x
Apply downward pressure to the
boiler cap (8) and unscrew by
turning it anticlockwise; Fig 2.
x
Turn the fill water bottle (K)
upside down on the boiler
opening and apply downward
pressure on the bottle to fill the
boiler; Fig 2.
x
Screw back the boiler cap (8) by
turning it clockwise while
simultaneously applying
downward pressure; ensure the
boiler cap is securely tight.
x
Remove the water tank cover
(5), fill the water tank (1) with 34
ounces of tap water and lock the
cover back into locked position.
This operation will ensure that
the air is filtered and any
impurities (Dust, Mites, etc.) are
trapped. For proper use, do not
exceed the “Minimum” water
level shown on the tank. Fig 3.
x
Plug the A/C power cord into a
three prong electrical outlet.
Fig. 1
Fig. 2
Fig. 3
6
Connecting the Accessories
WARNING:
Failure to secure the accessories using the clasp provided
can pose a hazard; the accessories can suddenly come off while the
machine is in use.
The accessories can be connected directly to the
handle of the work hose (E) or to the extension
wands (A), when so required. To secure the
accessories to each other, simply fit the male end of
one into the female end of the other and rotate the
locking clasp. Fig 4.
Fig. 4
All the following functions can be used with any one of the accessories provided:
x
Steam Functions
x
Vacuum Functions
x
Simultaneous Vacuum and Steam Functions
To remove the accessories:
x
Stop the steam function by releasing the steam on/off button (F) on the
handle of the work hose (E)
x
Stop the vacuum function by releasing the vacuum on/off button (G) on the
handle of the work hose (E)
Fig. 5
Fig. 6
x
Rotate the accessories locking clasp.
Fig. 4. Now, you can disconnect the
accessories.
x
Connecting the bristled frames to the
brush (B). Two different types of
frames can be attached to the large
multifunction brush to clean and care
for all surfaces:
x
Bristled frame with rubber lip
attachments (C), suitable for hard
surfaces, for best steam collection.
x
Bristled frame with attachments (D)
suitable for loose and fitted carpets,
etc…
x
To change frames (C-D) simply slide
the frames in or out in the direction
shown in the illustration. Fig. 5.
x
Connecting the nozzle (J) and small
brushes (L)
The nozzle is especially suitable for the
cleaning of:
x
Radiators, Sinks, Toilets, Showers
Walls, Tiles, and carpet stains.
7