Tanaka TCS-3401 - Manual (Page 2)

www.tanakapowerequipment.com 1 [email protected]
Owner’s Manual TCS-3401
Before using this unit:
• Read the operator’s manual carefully.
• Check that the cutting equipment is correctly assembled
and adjusted.
• Start the unit and check the carburetor adjustment.
See “Maintenance”.
Warning, kickback danger. Be careful
sudden and accidental upward and/or
backward motion of the guide bar.
One-handed usage not permitted.
While cutting, hold saw firmly with
both hands with thumb firmly locked
around front handle.
The saw is specially designed for tree
service and therefore shall be used by
trained operators only, in off-ground
work in trees.
WARNING
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Always wear eye, head and ear
protectors when using this unit.
It is important that you read, fully understand and
observe the following safety precautions and
warnings. Careless or improper use of the unit
may cause serious or fatal injury.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.