beautypg.com

Ownership, Required tools, Uncrating installation / operation instructions – True Manufacturing Company THF-41FL User Manual

Page 6

background image

............ www.truemfg.com ............

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

4

4

To insure that your unit works properly from the
first day, it must be installed properly. We highly
recommend a trained mechanic and electrician install
your True equipment. The cost of a professional
installation is money well spent.

Before you start to install your True unit, carefully
inspect it for freight damage. If damage is discovered,
immediately file a claim with the delivery freight carrier.

True is not responsible for damage incurred
during shipment.

OWNERSHIP

Adjustable

Wrench

Phillips Head Screwdriver

Level

REQUIRED TOOLS

Step 1

The following procedure is recommended for uncrating
the unit:

A. Remove the outer packaging, (cardboard and bubbles

or styrofoam corners and clear plastic). Inspect for
concealed damage. Again, immediately file a claim
with the freight carrier if there is damage.

B. Move your unit as close to the final location as pos-

sible before removing the wooden skid.

Note: Keys for freezer with door locks are located

in warranty packets.

C. Insert key with lock into the key hole. Turn and pull

the key out. The lock will stay in the key hole.

D. To remove the lock from the key hole simply do the

reverse process. Insert the key into the lock. Turn
and pull the key and lock out of the key hole. (See
images 1-3)

UNCRATING

INSTALLATION / OPERATION INSTRUCTIONS

1

2

3

REMOTE UNITS (This section applies to
remotes only!)

• Remote cabinets must be ordered as remote.

We do not recommend converting for a standard

self contained to remote system.

• All remote cabinets must be hard wired.

• No castors available.

• All remote cabinets come standard using 404A
refrigerant.

• All remote units come standard with expansion
valve, liquid line solenoid, heated condensate

pan, and defrost timer when applicable.

• Contact True Technical Service for BTU

requirements.

• No wiring necessary between cabinet and

condensing

unit.

• All remote condensing units purchased from

True are 208/230 volts single phase.

If you have any questions regarding this
section, please call True at 1-(800)-325-6152.