Technicolor - Thomson 2 8 D G 2 1 C - Manual (Page 10)

GB
INSTALLATION MAIN MENU
Exit
Manual programming
Auto installation
Programme organisation
Personal settings
PROGRAMME ORGANISATION
Return
Select program.
Swap with PR.
Change pr. name
Delete program. 13
- -
EURO
13
10 MTV
11 FR2
12 TF1
13 EURO
14 CH40
15 CC01
16 ARTE
17 CART
18 - - - -
19 ARD
Select programme number using
PR-/PR+ or or 0 to 9 keys.
Select the line marked Return to return to the previous
menu.
Programme organisation
8
Programme organisation
During automatic installation, your television will search for the channel name and assign it a programme number
according to the selected country. You can use the
PROGRAMME ORGANISATION menu to name any channel
name not found, to change the order in which the channels are displayed, or to delete channels for which reception
is too poor. Follow the messages at the bottom of the screen. For further details, read the information below.
If you wish to access the
PROGRAMME ORGANISATION ,
menu thereafter, first press and hold
the
key on the remote control to
display the INSTALLATION MAIN
MENU (the SUMMARY is displayed
first, followed by the INSTALLATION
MAIN MENU ) then select Programme
organisation and validate using .
- To delete a programme for which reception
is too poor:
1. Select the line marked
Select program.
2. Use the / or Left/Right keys to list
your channels.
3. When you get to a channel you wish to delete,
select the line marked Delete program.
4. Press to delete the programme.
5. .Validate using .
- To organize your channels to suit you:
1. Select the line marked
Select program. .
2. Use the / or Left/Right keys and
the programmes logos to find the programme
to which you wish to give the No.1.
Its present number appears on the line
marked
Select program. .
3. Select the line marked Swap with PR.
4. Enter 01.
5. Press . The two programmes swap
position and the desired programme
becomes N°1.
6. Repeat the above procedure for the other
channels.
- To name your channels:
1. Select the line marked
Change pr. name
2. Select the character you wish to modify using
the Left/Right keys.
3. Use the and keys to display the letter you
require.
The
name you have entered will be
memorised when you move to another line or
exit the menu.
If you wish to change the order in which
your programmes are displayed or if
you wish to name other programmes,
repeat
the procedures described
above.
When you have finished organizing the
programmes, exit the menu using .