Rf tx = freq 1 rf rx = freq 2, Rf tx = freq 2 rf rx = freq 1 – Telex RadioCom BTR-500/600C User Manual
Page 32
Beltpack to Beltpack System
The following is an example of a beltpack to
beltpack system. The two operators need to be in
constant, full-duplex communication with each
other in a noisy paper press environment.
Figure 51
Example of a TR-500 System used at a Publishing Firm
-29-
T
elex
RF TX = FREQ 1
RF RX = FREQ 2
T
elex
RF TX = FREQ 2
RF RX = FREQ 1
Single Beltpack to Single Beltpack System
This manual is related to the following products: