Front panel controls, Back panel, Reference – Technicolor - Thomson DRD302RA User Manual
Page 50: On/off turns the dss, System. out to tv use to connect the dss, Receiver. the dss, Receiver from another room
Reference
48
The Access Card door slides open so that you can replace the card when necessary.
Front Panel Controls
ON/OFF
DISPLAY
ANTENNA
MENU
SELECT
ON/OFF Turns the DSS
®
receiver’s power on or off.
DISPLAY Brings up the on-screen channel marker.
ANTENNA Switches the source of the video signal from DSS
®
satellite signals to an off-air antenna or cable
signal.
ARROWS Press the navigation arrows to move the on-screen highlight up, down, left, or right. Using the
arrows to highlight a menu item is also called “pointing.”
MENU•SELECT Brings up the Main menu. If you are already in the menu system, press MENU•SELECT to
select a highlighted choice.
ACCESS CARD Identifies you to your program providers. The DSS
®
system requires a valid access card.
IN FROM ANT Use to connect an off-air antenna or cable TV signal to the DSS
®
system.
OUT TO TV Use to connect the DSS
®
receiver to your TV. However, if your TV has audio/video jacks, you
should use those jacks to get better picture and sound quality.
CH3/CH4 SWITCH If a coaxial cable is used to connect the DSS
®
receiver to your TV, you must set the CH3/CH4
SWITCH. For example, to see the DSS
®
signal on TV channel 3, set the switch to 3.
S-VIDEO Provides the best picture quality. If your TV has S-VIDEO capability, use this jack along with the
audio/video jacks to connect the DSS
®
receiver to your TV.
VIDEO Provides better picture quality than the OUT TO TV jack. If your TV has audio/video capability, use this
jack to connect the DSS
®
receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV jack. If your TV has audio/video capability,
use these jacks to connect the DSS
®
receiver to your TV. You must also connect the VIDEO jack.
WIDE BAND DATA PORTS This port allows you to connect the DSS
®
system to future services and accessories as
they become available. A shielded cable and additional hardware may be required.
SATELLITE IN Use to connect the DSS
®
receiver to the satellite dish.
PHONE JACK Use to connect a phone line to the DSS
®
receiver. The DSS
®
system requires a phone line
connection to periodically call out to program providers.
REMOTE IN Use in conjunction with a remote control signal extender to control the DSS
®
receiver from
another room.
OUT
TO
TV
IN
FROM
ANT
S-VIDEO
VIDEO
R
L
AUDIO
WIDE BAND DATA
REMOTE IN
SATELLITE IN
PHONE JACK
CH 4
CH 3
Back Panel