Technicolor - Thomson XRB3059-A - Manual (Page 9)

Quick surround sound setup 03
9
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 3:
Quick surround sound setup
Automatically setting up for
surround sound (MCACC)
The Auto Multi-Channel Acoustic Calibration
(MCACC) setup measures the acoustic
characteristics of your listening area, taking
into account ambient noise, speaker size and
distance, and tests for both channel delay and
channel level. After you have set up the
microphone provided with your system, the
receiver uses the information from a series of
test tones to optimize the speaker settings and
equalization for your particular room.
Important
• The Auto MCACC Setup will overwrite any
existing speaker settings you’ve made.
• Make sure the headphones are unplugged.
Caution
• The test tones used in the Auto MCACC
Setup are output at high volume.
1 Switch on the receiver and your TV.
2 Connect the microphone to the MCACC
SETUP MIC jack on the front panel.
Push down on the PUSH OPEN tab to access
the MCACC SETUP MIC jack.
If you have a tripod, use it to place the
microphone so that it’s about ear level at your
normal listening position. Otherwise, place the
microphone at ear level using a table or a chair.
• Make sure there are no obstacles between
the speakers and the microphone.
3 Press RECEIVER on the remote control,
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use
/ / / and ENTER on the remote
control to navigate through the screens and
select menu items. Press
RETURN to exit the
current menu.
• Press SETUP at any time to exit the System
Setup menu. 1
4 Select ‘Auto MCACC’ from the System
Setup menu then press ENTER.
RECEIVER SOURCE INPUT
SELECT
DVD TV DVR TV CTRL
CD FM AM RECEIVER
CD-R/TAPE USB
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
+10 D.ACCESS CLASS DISC
ENTER
TV CONTROL
VOL
TUNE
TUNE
ST ST
INPUT
SELECT TV CH
REC
TV VOL
ENTER
TOP MENU
DTV MENU T.EDIT
MENU
RETURN
GUIDE
SETUP
Note
1 The screensaver automatically starts after three minutes of inactivity. If you cancel the Auto MCACC Setup at any time, the
receiver automatically exits and no settings will be made.
UP DOWN
MASTER
VOLUME
MCACC SETUP MIC
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
2. Auto MCACC
Surr Back System
Normal (SB) ]
: Cancel ENTER: Start
VSX_816.book.fm 9 ページ ２００６年２月２０日 月曜日 午後２時１４分