Topcom ALLURE 200 - Manual (Page 6)

6 Topcom Allure 200
Topcom Allure 200
• Use the Up or Down button to select prefix (0-9 or ‘-’ to unselect)
• Press the Volume Up / Delete / button confirm the prefix.
If no button is pressed within 10 seconds, the unit will return to standby mode.
To dial out the prefix before the selected number out of the call list of phonebook,
press the dial button twice.
4.6 Parallel telephone allow/forbid
You can forbid that another telephone can be placed in parallel with the allure 200. If you
activate this function the parallel telephone call will be disturbed.
• Press the Volume Up / Delete / button for 3 seconds, the display language is
shown.
• Press repeatedly the Volume Up / Delete / button until ‘Parallel Allow‘ is display.
• Use the Up or Down button to select ‘Parallel Forbid’
• Press the Volume Up / Delete / button confirm the setting
!!!! This function will not work when the phone is installed behind a PABX.
4.7 Tone/Puls setting
To change the dial mode, press the mute key briefly in standby mode.
The selected mode is displayed.
5 Making a phone call
There are 2 ways to make a phone call :
1.
Enter the telephone number. If needed, you can erase the last digits by pressing the
Erase button
.
Pick up the handset or press the Dial button . The phone number will be dialled
automatically.
2. Pick up the receiver or press the Handsfree button . Enter the telephone number.
Note: The call duration timer is shown on the 1e line of the display [h:mm:ss].
5.1 Last number redial
The Allure 200 saves the 8 last dialled telephone numbers in the memory with indication of
the call duration.
Press the Redial button
to scroll through the Redial memory. When the desired number
appears on the display, there are two ways to call back :
1.
Press the Dial button . The desired number will be dialled automatically in
handsfree.
2. Pick up the receiver. The number will be dialled automatically.