Technika PICTURE FRAME X800 - Manual (Page 10)

VIEWING PICTURES
Switch the ON /OFF switch on the frame to ON or press the button
on the handset to bring the frame out of Standby.
If there is a memory device inserted the device will start a slideshow.
When the frame detects a memory devices it displays all the viewable
images. All folder structures are ignored.
VIEWING PICTURES IN SLIDE SHOW MODE
Slide show mode displays all viewable pictures in sequence.
• To move to the next picture: Press the key once
• To move on several pictures: repeatedly press the key.
• To move to the previous picture: Press the key once
• To move back several pictures: repeatedly press the key.
PAUSE MODE
• To pause the slide show: Press the OK key
• To advance one picture at a time: Press the key.
• To go back one picture at a time: Press the key
• To resume normal slideshow play: Press the OK key again.
ZOOM AND PAN
Press the key to cycle the picture size:
→ x2 → x4 → x8→x16 →Normal...
Entering ZOOM mode automatically pauses the slideshow.
When the Zoom is positive (i.e greater than 1)
• Press the keys to pan the picture to left or right
• Press the keys to pan the picture up or down
• To resume slideshow play: cycle Zoom to Normal and press OK.
CHANGING THE ASPECT RATIO
• Press the key to change the aspect ratio from 4:3 to 16:9.
What does this mean? Most digital cameras take pictures in the ratio
4:3. This is also the ratio of the frame. If a picture is in “widescreen”
mode (16:9), pressing the key will increase the picture’s height to
fit the frame screen, though the sides may be cropped.
You can also use this key to change the ratio the other way. The picture
will be compressed sideways to fit the screen though in this case you
may see black bars above and below the picture.
Press the key again to restore normal screen size.
Note: This feature can only be be used when a picture is larger than
the frame. If a picture is fully visible in the frame the key has no effect.
Page 10