True Manufacturing Company Dipping Cabinet: Freezer TDC-47 - Manual (Page 2)

StanDaRD FeatuReS
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Plan VIew
KCL
TDC-47
DESIGN
True’s visual dipping cabinets are uniquely
•
designed to provide the user maximum
functional reliability in an attractive
merchandiser to brilliantly display and serve
ice cream product.
REFRIGERATION SYSTEM
Factory engineered, self-contained, capillary
•
tube system using environmentally friendly
(CFC free) R404A refrigerant.
Cold wall refrigeration system. Maintains
•
-10°F to +8°F (-23.3°C to -13.3°C).
Patented reversing condenser fan motors. Fan
•
motors reverse during defrost off cycles to
help keep condenser coil free from dirt, dust
and debris. Keeping coils clean optimizes the
unit’s performance providing colder holding
temperatures and increased energy efficiency.
Regularly scheduled thorough cleaning of
coils still recommended.
Condensing unit located behind rear grill on
•
right side; slides out for easy maintenance.
Manual defrost system; drain tube with hose
•
connector conveniently located behind rear
access panel.
CABINET CONSTRUCTION
Exterior - non-peel or chip white laminated
•
vinyl clad steel; durable and permanent.
300 series stainless steel top with raised rim
•
protects cabinet and helps minimize spillage
to keep cabinet interior clean.
Interior - high quality white enamel powder
•
coat finish on galvanized steel.
Insulation - entire cabinet structure is foamed-
•
in-place using Ecomate. A high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global
warming potential (GWP).
Heavy duty, galvanized steel base rail with
•
white enamel powder coat finish.
CANOPY/LIDS
Stainless steel frame with tempered, single
•
pane glass viewing window.
Hinged, transparent acrylic dipping
•
compartment service lid with full length
handle. Top and back wiper gaskets for
improved seal.
SUPPORT RACKS
Four (4) heavy-duty, PVC coated wire can
•
support racks 7" x 20 1/2" (178 mm x 521 mm).
Positions the open ice cream containers on
top level to optimum service height.
Each rack designed to hold two (2) 9
•
1/2"
(242 mm) diameter, 3 gallon (12 L) ice cream
containers.
Lower level beneath support racks provides
•
for extra can storage of four (4) 9 1/2" (242 mm)
diameter, 3 gallon (12 L) ice cream containers.
LIGHTING
Safety shielded, fluorescent interior canopy
•
lighting for brighter, shadow free illumination.
Independent on/off switch.
Cabinet lighting utilizes electronic ballast and
•
T-8 bulbs for brighter illumination, longer
bulb life and increased energy efficiency.
MODEL FEATURES
White, 6" (153 mm) wide, NSF approved,
•
removable magnetic frost shields. Provides
for easy clean up and removal of ice build-up
on cabinet walls.
Two (2) white plastic night covers for case
•
opening.
Eight (8) removable, molded plastic can skirts
•
for 9 1/2" (242 mm) diameter, 3 gallon (12 L)
cans. Firmly holds cans in place and provides
attractive, neat appearance.
NSF-7 compliant for open food product.
•
ELECTRICAL
Unit completely pre-wired at factory and
•
ready for final connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord and
plug set included.
RECOMMENDED OPERATING CONDITIONS
TDC models are designed to operate in
•
an air conditioned environment where
temperatures do not exceed 75°F and 55%
relative humidity.
Units should be installed away from direct
•
sunlight, rapid air movement and extreme
temperature changes.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
6" (153 mm) standard legs. ❑
6" (153 mm) seismic/flanged legs. ❑
2 ❑ 1/2" (64 mm) diameter castors.
Dipper well kit (NSF approved). ❑
Lid locking kit (lock not included). ❑
Dipping Cabinet:
Freezer
Model Elevation Right Plan 3D Back
TDC-47 TFM011E TFM010S TFM011P TFM0113 TFM011B
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)