Technicolor - Thomson IB5000 - Manual (Page 17)

17
GB GB
3
-
D
Surround / Dialogue languages
If you use a stereo TV or a two-channel stereo system, be sure that in the audio options of the setup
menu, “Dolby Digital Out” and “MPEG-2 Digital Out” are set to “PCM” (see page 25).
Press twice the
INFO key ( 10 ), then select Surround with keys and switch the function On
or Off with keys.
Virtual 3-D Surround Sound (for DVDs, Video CDs, Audio CDs)
• For optimum effect the distance between the TV set
and the listening position must be about 3 or 4 times
the distance between the front speakers.
• Turn off the TV set surround sound and other
surround effects (HiFi system).
• 3-D surround does not work with LPCM or DTS
sound tracks of DVD discs, or with DTS track of
Audio CDs. It is possible only on DVDs with Dolby
Surround or Dolby Digital.
• This feature only operates from the Analog Audio
out and from the Scart connector. It will not operate
from the Digital Audio Out (optical), if “Digital
Audio Out” or “MPEG-2 Digital Out” are set to
“BITSTREAM” in the Audio options of the setup
menu (see page 25).
• The simulated surround effect depends on the disc contents.
• This technology is manufactured under license from Desper Products Inc.
• ”SPATIALIZER
R ”, “N-2-2 TM ” and the “Circle in square” are Trademarks owned by Desper
Products Inc.
Audio language (for DVDs)
B - Using the Disc Menu (if available).
In play mode, press the MENU key ( 19 ). The disc
menu appears on-screen with (possibly) the dialogue
languages available on that particular DVD disc.
Select the desired language with Navigation keys ,
then press OK ( 15 ) to confirm.
A - Using the player info display.
In play mode, press the red key ( 8 ). The
audio display appears on-screen with (possibly) the
abbreviation of the language and the corresponding
audio format.
Select a language with
Navigation keys.
Exit the Audio display with the red key ( 8 ) or
press CLEAR ( 25 ) to remove the banner without
making changes.
During playback, with some discs, you can choose to hear other soundtrack languages (up to 8 if
available) than the original one. The audio languages available on the disc are indicated on the
back cover of your DVD disc box. According to the disc you will have to access to the Audio
languages selection either with the
red key ( ,) on your remote control or with the MENU key.
These 2 possibilities are detailed in the A or B procedure below. The audio returns to the player’s
initial settings after the disc is removed or power is switched off. The initial settings have been
made during the DVD player’s set up on page 4.
ENG DOLBY DIGITAL 5.1 CH
Example
Title
Chapter
Time
Audio:ENG
2CH
Subtitle
ENG
Info 1/2
Angle
1/3
Repeat
Track 05
Master Vol.
64
Intro
Surround
On
Info 2/2
DISC MENU
Dialogue Language
1 English
2 Deutsch
3 Français
4 Italiano
IB5000_5200GB 4/09/01 10:12 Page 17