Tricity Bendix BIW 126 W - Manual (Page 11)

11
To start the selected programme, press the “start pause”
button; the corresponding light stops flashing.
Only the “wash” pilot light stays on.
The “door” light comes on to indicate that the door is
locked.
The machine starts operating.
8. At the end of the
programme
The machine stops automatically.
If the “rinse hold” option has been selected, the phase
light “end” and the “door” light are on to indicate that
the water must be emptied out before opening the door.
To do this first turn the programme selector dial to “O”
and then to drain programme 14 or spin programme 15.
In this case reduce the spin speed by means of the
relevant button to adapt it to the fabrics to be spun.
The door can only be opened after the relevant pilot light
on the control panel has gone out.
Release of the lock is also indicated by the illumination
of the “end” light.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
start
pause
132991560.qxd 30/07/2003 13:54 Pagina 11 (Nero/Process Black pellicola)