Equalizer – Tascam D00851300A User Manual

Page 21

TASCAM CD-BT1MKII —

The CD-BT1MKII has a 5-band equal-

izer for bass guitar input and two EQ

slots (A and B) for the equalizer.
After an EQ slot is selected and you edit

the equalizer settings, the edited EQ

settings will automatically be stored in

the selected EQ slot.

Setting the equalizer

1. Tap the

EQ/EDIT

key to select ei-

ther EQ slot A or B (pressing the

EQ/EDIT

key cycles through EQ

slot A, B, and OFF).

2. Press and hold the

EQ/EDIT

key

to enter the

menu.

3. Select a parameter from the choic-

es below by pressing either the

PREV

NEXT

key:



EQ L

(Lo : 80 Hz)



EQLM

(Lo-Mid : 200 Hz)



EQ M

(Mid : 500 Hz)



EQHM

(Hi-Mid : 1.25 kHz)



EQ H

(Treble : 3.15 kHz)



MID

Mid Shape (EQ adjust
ment) ON/OFF

4. When the selected parameter ap-

pears on the display, use either the

DOWN

key to adjust the

level of gain. The available range

of values for adjustment is be-

tween -15 – +15.

5. Press the

TIME/ESC

key to exit

the

menu and return to the

home display mode. The param-

eters set in the

menu are au-

tomatically saved in the EQ slot

selected in step 1.

Recalling equalizer settings

Press the

EQ/EDIT

key to select the EQ

slot you want to recall.

TIP

If you have connected a footswitch such as
TASCAM RC-30P (sold separately), you can
step through the bank slots by pressing the
footswitch. Make sure that FOOT in the Setup
menu is set to EQ+.

Equalizer