Tascam DR-07MKLL User Manual

Page 2

06/28/11

Page 2 of 2

Guide To Using
TASCAM Handheld Recorders
For DSLR Filmmaking

7733 Telegraph Rd • Montebello, CA • 90640 • 323.726.0303 • www.tascam.com

Connecting to your Camera

Advantages of Audio Recorders

1. Attach the recorder to your camera using a hot shoe

mount (sold separately)

2. Connect an 1/8” cable from the line/headphone output of

the recorder to the MIC IN of your camera (also sold sepa-
rately, use an attenuator cable if available)

3. Set your camera to use the line/mic input, if necessary

4. To automatically synchronize your video clips with the DR-

series recordings, use software like Adobe Premiere Pro
CS5.5, Apple Final Cut Pro X or Singular Software
PluralEyes.

• You can assign someone to just record audio, so they can get

closer to the talent with a microphone for a better recording.

• TASCAM recorders are purpose-built for audio, so setting audio

levels and adjusting settings is often as easy as a single button
press or switch

• You can set the audio recording level to be manual or automatic

• TASCAM handheld recorders have a limiter during recording, so

that sudden loud sounds won’t be distorted.

• The separate line out and headphone out on the DR-100 allows

you to listen in headphones while you send a copy of the signal
to your camera to sync up later.

• A selectable low cut filter allows you to cut bass rumble or wind

noise while recording

• Dual batteries on the DR-100 allow you to swap batteries for

extended battery life – even while recording

Optional WS-DR2 Windscreen

This manual is related to the following products: