Telex PH-100 - Manual (Page 2)

PH-100 Specifications
Connector Termination
PH-100: XLR 4-pin Female
PH-100A5: XLR 5-pin Female
PH-100PT: Stripped Wire
PH-100R: XLR 4-pin Male
PH-100R5: XLR 5-pin Male
Type
Single Sided
Mic Type
Dynamic Noise-Canceling
Mic Sensitivity
-65dBV/Pa @1cm
Mic Frequency Range
150Hz - 8kHz
Mic Impedance
200Ω
Speaker Sensitivity
97dB SPL @1kHz, 1mW
Speaker Frequency Range
500Hz - 4kHz
Speaker Impedance
300Ω
Weight
16oz. (not including cord)
Cord Length
6 ft. Ordering Information
PH-100
Single-Sided Headset with Flexible Dynamic Boom
Mic & A4F Connector
Catalog Number: 301581-007
PH-100A5
Single-Sided Headset with Flexible Dynamic Boom
Mic & A5F Connector
Catalog Number: 301581-009
PH-100PT
Single-Sided Headset with Flexible Dynamic Boom
Mic, & Pigtail Termination
Catalog Number: 301581-011
PH-100R
Single-Sided Headset with Flexible Dynamic Boom
Mic & A4M Connector
Catalog Number: 301581-008
PH-100R5
Single-Sided Headset with Flexible Dynamic Boom
Mic & A5M Connector
Catalog Number: 307581-010
This specifications information is preliminary and is subject to change without notification.
Brand names mentioned are the property of their respective companies.
Contact Information
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, Minnesota 55337
Telephone: 877·863·4169
Fax: (800) 323-0498
Form Number: 38110-358 Rev B
Date: December, 2007