Toshiba W-522 - Manual (Page 23)

23
PLA
YBACK
Tape Remaining Time
To view the tape remaining time in the VCR display, select the
tape length beforehand.
1
Turn on the VCR and load a cassette.
2 Press PROG. to display the MENU screen.
3 Select “SET UP” using FF or REW, and press ENTER.
4
Select the length of the tape, using
FF or REW.
T120: for a T-120 tape or shorter
T160: for a T-140 or T-160 tape
T180: for a T-180 tape
5 Press PROG. to exit.
6
Press REMAIN/COUNTER.
The remaining time (“R - : - -”) appears in the VCR display.
Notes
• The displayed remaining time is an approximation.
• The remaining time is calculated according to the tape speed (SP or SLP)
and the cassette type.
Counter Function
You can view the clock, linear time counter or tape remaining
time in the VCR display or on the TV screen.
Each time you press REMAIN/COUNTER, the VCR display
changes in sequence as follows:
The indication above will also appear on the TV screen by pressing
DISPLAY. They are switchable with REMAIN/COUNTER.
To reset the linear time counter to “0:00:00”
The counter is automatically reset to “0:00:00” when a cassette is
ejected. If you want to reset at another point, such as the beginning of a
new recording, just press
COUNT RESET.
Notes
• The linear time counter does not work on non-recorded portions on the tape.
• When the tape is ejected or the VCR is turned off, the display changes to
clock.
• If the tape rewinds back over “00:00”, “–” appears in the VCR display.
• The displayed time of the linear time counter is only an approximation.
→
Linear time counter
→
Tape remaining time (R)
→
Clock
SLOW PAUSE/STILL
REC TIMER
TV VCR POWER
I.SELECT
SP/ SLP DISPLAY
TV VOL
COUNTER
PROG. CANCEL
REMAIN/ RESET COUNT
EJECT
CM SKIP
1 2 3
6 5 4
100
9 8 7
0
F F
A.SELECT
ENTER
STOP
REW
PLAY
ENTER
FF
REW
STOP
REMAIN/
COUNTER
PROG.
COUNT RESET
PLAY
DISPLAY
For
W-528/
W-522
only
PLAYBACK
Useful Functions in Tape Operation
These functions will help your playback.
W-528 522 422 eng (20-24) 2/28/02, 2:31 PM 23