Groupe SEB USA - T-FAL FV9440 - Manual (Page 8)

R
é
f.
1
8
0
0
1
1
3
0
1
7
•
0
5
/2
0
0
8
•
S
u
b
je
ct
to
m
o
d
if
ic
a
ti
o
n
s
•
JP
M
&
A
ss
o
ci
é
s
•
m
a
rk
e
ti
n
g
-d
e
si
g
n
-c
o
m
m
u
n
ic
a
ti
o
n
•
3
3
(0
)3
8
0
5
6
2
8
1
1
If you have any problem or queries, please contact our
Customer Relations team first for expert help and advice.
845 602 1454 - UK
(01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
• The soleplate is
dirty or brown and
can stain the linen.
• You have ironed with an unsuitable
programme (temperature too high).
• You are using starch.
• Select the appropriate program.
Refer to the chapter “Clean the
soleplate“
• Spray starch on the underside of
the fabric to be ironed.
• There is little
or no steam.
• The water tank is empty.
• The anti-calc valve is dirty.
• Your iron has a build-up of scale.
• Your iron has been used dry for too long.
• Fill it.
• Clean the anti-calc valve.
• Clean the anti-calc valve and
carry out a self-clean.
• Carry out a self-clean.
• Wait for the soleplate to reach
the correct temperature.
• The soleplate is
scratched or
damaged.
• You have placed your iron flat on a
metallic rest-plate or ironed over a zip.
• You have cleaned your soleplate with an
abrasive or metal pad.
• Always set your iron on its heel.
• Try to avoid ironing over zips.
• Refer to the chapter “Clean the
soleplate”.
• Water is leaking
out through the
water tank cover.
• You have not closed the water tank cover
properly.
• Make sure the water tank cover
has clicked shut.
• Steam or water
come from the iron
as you finish filling
the tank. • The steam control is not set to the DRY
position .
• Check that the steam control is
set to the DRY position .
• The spray and/or
shot of steam do
not work. • The water is empty. • Fill the water.
• Water leaks out of
the front of the
iron.
• You have exceeded the level MAX when
filling the water tank.
• Empty the surplus water out of
the water tank.
UltimateAutoclean_GB.qxd:TEFAL193 27/05/08 9:07 Page 8