Topcom MM 1000 - Manual (Page 9)

TOPCOM MM-1000
E
N
GL
IS
H
7.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase
note. If the unit develops a fault during the warranty period, Topcom or its officially
appointed service centre will repair any defects caused by material or manufacturing
faults free of charge.
Topcom will at its discretion fulfill its warranty obligations by either repairing or
exchanging the faulty units or parts of the faulty units. In case of replacement, colour
and model can be different from the original purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty
period is not extended if the unit is exchanged or repaired by Topcom or its appointed
service centres.
7.3 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting
from use of non-original parts or accessories not recommended by Topcom are not
covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning,
water and fire, nor any damage caused during transportation.
No warranty can be claimed if the serial number on the units has been changed,
removed or rendered illegible.
This product is in compliance with the essential requirements and
other relevant provisions of the directive 2004/108/EC.
The Declaration of conformity can be found on:
http://www.topcom.net/cedeclarations.php