Telex Stratus 50 - Manual (Page 6)

Page 4
Figure 6
Mic Element Removal
Figure 5
Microphone Placement
Figure 7
Mic Placement
Headset Operation (cont.)
2. Connect the headset as shown in Figure 4. If using the standard
version, set the stereo/mono headphone switch to match the type
of sound system in your aircraft. If the headset is set for stereo and
the intercom is set for mono, sound will only come out of one earcup.
4. Rotate the entire boom overhead to wear the microphone on either
the right or left side of the head (See Figure 5).
5. Reshape the boom so that the microphone will be in front of
the mouth.
6. For best noise cancelation, position the microphone as close to the
mouth as possible and speak in a normal voice (Figure 7).
7. For mic replacement, press the release catch and carefully pull out
the mic element. Avoid pulling the connecting wires (Figure 6).
3. Connect cellular telephone and/or audio input devices as desired.
Figure 4 Headset Connections
Auxilary Jack
Cell Phone Jack
Stereo/Mono Switch
Mute Switch
To Radio Microphone “IN” Jack
To Radio Receiver “OUT” Jack