Storing – Top Innovations SP-350 User Manual

Page 9

Drain the unit by removing the drain plug

(located at the side of the main unit-see
P.4

# 11).

This will allow contents of the

reservoir (main unit) to drain. Tipping the
unit in the direction of the drain plug to
remove any remaining water. Replace the

drain plug.

Using distilled water will eliminate a

residue build up usually found in tap water.

CLEANING AND

STORING

1 .

Turn the

ON/OFF

switch t o the

OFF

position and unplug from the power

source.

Wait for the steamer to cool completely

for at least

m i n u t e s .

Remove and drain the water container.

Drain the unit

by removing the drain

plug and allowing the contents

of the

reservoir to drain. Tip the unit in the direction

of the drain

plug to

remove remaining

water. Replace

t h e

plug.

4. Remove the steamer hose

and

hanger

rod.

5 . Remove the Water T a n k .

6. Remove excess water from the reservoir

by lifting the unit and pouring. Flush the

reservoir area with fresh water to clean
any residue

from

the water source.

valve

7. Reattach the hose, hanger rod and water

container and store the unit.

P.8