beautypg.com

Settings, Showing demonstration, Setting the clock – Technicolor - Thomson THOMSON Intuiva CS806 User Manual

Page 12: Setting the timer, Activating the timer, Program recording, Sleep mode

background image

EN

7

Settings

Showing Demonstration

Press DEMO to turn on/off demonstration mode.

Setting the Clock

1. Press and hold CLOCK on the remote control

until the hour flashes on the display.

2. Press

or

to set the hour and then

press CLOCK to shift to minute digits.

3. Press

or

to set the minute.

4. Press CLOCK twice to save and quit settings.

Setting the Timer

You can turn on/off the unit or record TUNER at
preset times by setting the timer.

1. Press and hold TIMER on the remote control

until Timer On and the clock hour flashes on
the display.

2. For setting time, press

or

to set

the hour and then press TIMER to shift to
minute digits.

3. Press

or

to set the minute.

4. Press TIMER to change to Timer Off setting

with clock time flashing. Press TIMER to select
source. Press

or

to select

Player/Tuner/Rec Tuner/CD/USB.
If Rec Tuner is selected, press

or

to select the preset station.

5. Press TIMER. Adjust VOLUME CONTROL to set

volume.

6. Press TIMER to save and quit setting. The timer

is automatically activated once timer setting is
saved.

Activating the Timer

Press and release TIMER to turn on/off the alarm.

is displayed when timer is activated.

Program Recording

When setting the Timer, select “Rec Tuner” as the
source to preset the unit to record radio at the
preset time. Make sure the USB device is
connected and have enough memory space.

Sleep Mode

You can select the time interval before the unit
turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
SLEEP is displayed when sleep mode is activated.

Viewing Remaining Sleep Time

When sleep is activated, press SLEEP once to
view remaining sleep time.

Adjusting Sleep Time

Press SLEEP again when the remaining sleep time
is displayed to change sleep time.

Note:
When system is ON, you can press

CLOCK to display the current time for about
2 seconds.

Tips:
“Rec Tuner” setting is for Program
Recording. For more information, see

paragraph below.

Note:
Sleep is automatically de-activated

when the unit is turned off.

CS806 EN 4/8/06 5:12 PM Page 14