Toastmaster MEFB2W - Manual (Page 7)

7
Brewing - Programming
Delay Timer
1. Follow steps 1 – 5 in Brewing – Immediate Start.
2. Be sure clock is set for current time.
3. Make sure that the carafe with lid is properly seated on the
warming plate.
4. Press the AUTO button once and release. The display will
show 12 : 00.
5. Set the desired program start time by using the HOUR and
MIN button as previously described in Setting The Clock.
6. During the setting, the AM/PM on the display will change
automatically.
7. Press the AUTO button again to complete the programmed
start time setting.
8. After setting, press the AUTO button once to display the
programmed start time. Press the AUTO button again to return
to actual time.
9. Press the ON/OFF button once. The display will show PRO in
the top left of the display. The coffeemaker is now in the
programmed delayed mode.
10. If you wish to serve a cup of coffee during the brew cycle,
simply remove carafe from warming plate. Dripping will
automatically cease. Return carafe to position on warming
plate within 30 seconds; dripping will resume. If the carafe is
not returned to the warming plate, the coffee may overflow
from the filter basket.
NOTE: To keep coffee hot, return carafe to the warming plate
after serving. The warming plate will automatically keep ideal
serving temperature as long as the coffeemaker is on. Do not
let empty carafe remain on heated warming plate.
11. Press the power button to turn the unit OFF when not in use.
When the brewing cycle is over, the coffeemaker will
automatically shut off after two hours. The indicator light will go off.
12. Unplug and allow to cool for 10 minutes between cycles.
NOTE: The program must be reset after each programmed
use.
MEFB2B&MEFB2W_IB_29-12-04 12/29/04 2:57 PM Page 7