Thermo Products Built Tough for Lifetime Comfort OMC-70 - Manual (Page 4)

4
Form No. PL81410041000-6/05-15Ms
Printed in the U.S.A.
© 2005 Thermo Pride - North Judson, IN
Phone: 574-896-2133
www.thermopride.com
Specifications
* All dimensions in inches
1 BTU output based on 80% efficiency.
2 On outlet dimensions, the first dimension is width.
3 Seasonal Efficiency (also called AFUE - Annual Fuel Utilization Efficiency) ratings are based on tests following U.S. Department of
Energy Test Procedures.
All specifications are subject to change without notice.
Combustible Floor Base
Required whenever a furnace is installed on
combustible material. It is shipped with a warm
air duct connector and
combustion air chute. The base
comes with knock-outs for all
combustion applications.
Roof Jack Assembly
Needed as a chimney for proper
venting in mobile homes.
MODEL NUMBER OMC-70
BTU per Hour Input 85,000
BTU per Hour Output 1 71,000
Height of Casing 57”
Width of Casing 18”
Depth of Casing 24”
Warm Air Outlet 2 12” x 12”
Diameter of Exhaust Vent 4”
Diameter of Combustion Air Intake 4”
Motor Horsepower 1/5 - 1 speed
CFM at .5 and .5 W.C. 780 650
Temperature Rise 85°
Number and Size of Permanent Filters 13-3/4” x 17-3/4” x 1”
Approximate Effective Heating Surface 3053 Sq. In.
Approximate Shipping Weight 210 lbs.
Seasonal Efficiency 3 83.2%
Accessories
Thermo Pride offers a complete line of heating and
cooling equipment. The addition of accessories
to your system can provide greater comfort and a
healthier indoor environment.
4” Straight Stainless Steel Vent Pipe
Connects the furnace to the roof jack assembly.
Cottage Base
Used whenever the furnace is
installed in a home, garage or
addition. Grilles or ductwork
may be cut in the base as needed.