Advanced mode functions, Choose source, Disc counter – Teac DVW-D110H User Manual
Page 23: Skip read err, Choose source disc counter skip read err
Advanced Mode Functions
TEAC 1x10 DVD Duplicator User’s Manual
15
Advanced Mode Functions
The
Advanced Operation
mode includes 17 functions. Each function is explained
below.
Choose Source
The
Choose Source
function enables you to change the device code of the source
drive. The default setting is
A
, which indicates that the system will automatically
choose the source drive.
❑ RUN: Modify parameter.
❑ SET: Save and quit.
Disc Counter
The
Disc Counter
function keeps track of the number of discs copied during auto-
operation mode. The default setting is
M
, which indicates
Manual
operation mode.
❑
A
: controller in
Auto-operation
mode determines the number of target discs
copied.
❑ RUN: Modify parameter.
❑ SET: Save and quit.
Skip Read Err
The
Skip Read Err
function enables you to control read errors from the source
drive. The default setting is
No
, which indicates that the system will stop when the
source drive encounters a read error and will reject the source disc.
❑
No
: The source drive will instantly reject the source disc upon detection of a
read error.
❑
SHORT
: The system skips read errors by sectors of 2kb.
❑
MED
: The system skips read errors by sectors of 100KB.
❑
LONG
: The system skips read errors by sectors of a few MB.
❑
SKIPA
: The system skips the reading of a track upon detection of a read
error.