Topcom BUTLER 2450 - Manual (Page 155)

ENGLISH
155
7.2 Base Key Functions
Note: - The & keys are at the bottom of the base
Key Stand-by mode During message
Press key briefly press key for 2 seconds play-back
1 Play OGM Record OGM Go to previous message
2 Playback messages None Pause
3
None Record memo Skip message
Set volume None Set volume
4 speech +ringing
5 Select OGM Switch On-Off Stop
6 Play VIP-code Set VIP-code None
7 Current number of Set numbers of None
ring tones ring tones
8 Playback Time Set date/time None
9
None Delete all messages Delete message or
delete OGM
7.3 Outgoing Messages
Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.
7.3.1 Recording outgoing messages (OGM 1 or OGM 2)
• Press the -key to select the OGM.
• A voice will playback the recorded OGM
• Press the
-key for two seconds
• Record the outgoing message after the beep
• Press the Stop
- key to stop recording.
Note: The recording cannot exceed 2 minutes. If no outgoing message is recorded, the prerecorded
outgoing message is used.
7.3.2 Playback the Outgoing Message
To check the outgoing message now set:
• Press the
key.
Note: To stop playing the welcome note briefly press the Stop - key .
1,2
1,2
1,2
Butler 2450
155
HANDL. B2450_scan.qxd 03-09-2002 17:05 Page 155