Technicolor - Thomson TM9255 - Manual (Page 6)

EN EN
8 7
Display Setting
Volume Control
Press VOLUME + on the main unit or VOL. + on the
remote control to increase volume and VOLUME -
on the main unit or VOL. - on the remote control to
decrease volume.
Volume level will show on the display while you are
adjusting volume. Minimum volume level is 0 and
maximum is 32.
Digital Bass Boost System
Press SOUND repeatedly to turn on and off DBBS
function. DBBS will show on the the display when it
is activated.
Boosting the Power
Slide POWER BOOST knob to “ON” position on the
main unit to activate the power boost function
which will enhance the output power of the unit.
Volume 17
Clock and Timer Setting
7. Press ENTER to save timer on time and move to
Timer-Off Time setting. The Timer-Off hour flashes.
8. Repeat steps 4 to 6 to set the time.
9. Press ENTER to save timer off time and move to
Timer Source setting.
10. Press PRESET or to select between CD
and RADIO as timer source.
Caution: Ensure the right radio
frequency is tuned or CD is loaded before
turning off the power.
11. Press ENTER to save timer source and move to
Timer Volume setting.
12. Press PRESET or to select volume level
between 1 to 32.
13. Press ENTER to save settings and return to Timer
setting menu.
The timer icon will show on the display when
timer is activated.
Enable / Disable Timer
1. Press and hold CLOCK on the main unit
until the clock and timer setting menu show on the
display.
2. Press PRESET or to scroll the menu to
select Timer On/Off.
3. Press ENTER or TUNE to select between
Timer On and Off.
Timer source
CD
Timer volume
Level 12
Set Clock
Set Timer
Timer On Off
Set Clock
Set Timer
Timer On Off
Timer-Off Time
12:00
LCD Contrast
1. Press MODE in any mode to access Mode menu.
2. Press PRESET or to scroll up and down
the menu and select System Setting.
3. Press ENTER or TUNE to enter and view
System Setting menu.
4. Press PRESET or to scroll up and down
the menu until LCD Contrast is selected.
5. Press ENTER or TUNE to enter LCD Contrast
menu.
6. Press PRESET or to adjust display con-
trast.
7. Press TUNE to exit to the previous menu level.
System Setting.
LCD Contrast
Contrast 09
Sound Features
Note:
Timer will automatically be
activated after Timer settings.
Note:
When the POWER BOOST function is
activated, the unit will consume more
power than normal operation. Thus the
batteries life might be shortened when using
DC power.
TM9255-EN 4/6/04 2:33 PM Page 10