Listening to an external source, Operating ipod 2 – Teac 1006.MA-1087A User Manual
Page 9
16
17
Listening to an External Source
Connect the PHONES jack (audio
output jack) of a portable audio
player to the AUX IN jack of the SR-
LXi using the supplied stereo mini
plug cable.
1
Play the source, and adjust the
volume of both the SR-LXi and the
audio player.
3
Select “AUX” using the FUNCTION
button.
2
When using the PHONES jack of your
mini player, you must adjust the volume
of the mini-player or you may hear no
sound from your SR-LXi.
<
Turning the volume of the mini player up
too high may cause the sound from your
SR-LXi to be distorted. If this is the case,
reduce the volume of the mini player
until the distortion stops and then adjust
the volume level of the SR-LXi to a
comfortable listening level
To activate the shuffle mode
During playback, press the SHUFFLE
button to change the shuffle mode.
Each time the SHUFFLE button is pressed,
the SHUFFLE setting of iPod is changed
as follows:
If iPod is set to shuffle songs or albums,
the Shuffle icon (
) appears in the
iPod’s display.
albums
songs
off
Select the menu item
Press the MENU/ALBUM buttons (‡/°)
to scroll to the menu item you want. And
then press the SELECT button.
Operating iPod 2
To activate the repeat mode
During playback, press the REPEAT
button to change the repeat mode.
Each time the REPEAT button is pressed,
the REPEAT setting of iPod is changed as
follows:
If the iPod is set to repeat one song, the
repeat Once icon (
) appears in the
iPod’s display.
If the iPod is set to repeat all songs, the
repeat icon (
) appears in the iPod’s
display.
All
One
off
You can use this way of connection to
listen to an iPod that has no Dock
connector or that has, but an appropriate
Dock adapter is not available.
To go back to the previous
menu
Press the MENU button. It works same as
the MENU button of the iPod.