Replacing the lamp, 2a 2c – Tech Lighting 700FJTRPN_ User Manual

Page 3

Text mode
Original mode

Replacing the Lamp

CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.

NOTE:

Use only your fingers and a soft cloth to

replace the lamp.

GROOVED
SHADE HOLDER

NEEDLENOSE
PLIERS

GROOVED SHADE
HOLDER TAB

If the accessory shade fits tight or loose onto the
Torpedo pendant, then carefully bend the grooved shade
holder tabs in or out slightly with needlenose pliers.

MR16 LAMP

GROOVED
SHADE HOLDER

ACCESSORY

Use MAX 50 Watt, MR16 Front Cover Halogen
Lamp.

Push the lamp pins into the socket and simultaneously
the accessory onto the grooved shade holder completely.

Round, Cone, Dichroic, Martini, Firebird, or Prism
Glass Shield; Belladonna; Bell; Tinkerbell; Lil Egypt;
Meteorite; Moonlet; or Droplet accessory are the
compatible accessories for the Torpedo pendant.

Put the MR16 lamp into the accessory.

Align the MR16 lamp pins with the Torpedo socket.