FoodSaver V1080 - Manual (Page 3)

g
Accessories
FoodSaver Accessory Guidelines
FoodSaver Accessories
Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.
1. Always leave at least one inch of space between
contents and rim.
2. Wipe rim of canister, container or bottle to ensure
it is clean and dry.
3. Place lid on canister or container, or place stopper
in bottle.
4. For accessories with a large knob on lid, turn knob
to
Vacuum . Vacuum package using instructions
below. When vacuum process is complete, turn
knob to
Closed before removing Accessory Hose.
5. For accessories without a large knob on lid,
vacuum package using instructions below.
How to Open FoodSaver Accessories after Vacuum Packaging
FoodSaver Vacuum Packaging Canisters
(without large knob on lid)
To release vacuum and open, push gray rubber
button on lid.
FoodSaver Bulk Canisters and Quick Marinators
(with large knob on lid) and Universal Lids
To release vacuum and open, turn knob on lid
to
Open .
FoodSaver Jar Sealer with Mason Jars
For use with Ball ® and Kerr ® brand Mason jars.
IMPORTANT: Do NOT use screw bands when
vacuum packaging jars. To open, wedge spoon
between Mason jar lid and highest part of threaded
rim. Twist spoon gently to release vacuum.
FoodSaver Bottle Stoppers
To release vacuum and open, twist and pull up on
Bottle Stopper.
How to Vacuum Package with FoodSaver Accessories
1. Prepare the container according to the FoodSaver
Accessory Guidelines above.
2. Insert one end of Accessory Hose (B) into
Accessory Port (G) on appliance. Insert other
end into port on accessory. Twist gray tab while
inserting to ensure a tight fit.
3. Lock lid by pressing lightly on stars and pulling
side locks
(F) forward until they click into place.
4. To begin vacuum process, press and release
On/Cancel Button
(C) . Motor will start and
Indicator Lights (D) will turn on in sequence.
Side locks (F) will automatically release while
motor is running.
5. When motor turns off, vacuum process is complete.
6. Gently twist and remove Accessory Hose from
accessory and appliance.
Note: For important tips on using accessories with
different foods, please refer to the FoodSaver
Reference Guide.
Insert Accessory Hose Press and Release On/Cancel Button
QS.1080_v5 5/10/04 11:26 AM Page 3